BRM Kadett C-Coupe #308 Analog / Carrera Digital

SKU: BRM172
Beautiful version of the Opel Kadett from the Berg Cup 2019.
Really great slotcar with high quality aluminium chassis, aluminium wheels and ball bearings.
The car is 1/24 scale, but the motor is for a usage from 12-15V.Therefore we only use the Carrere D132 chip for converting the BRM cars to Carrera digital.

Please read also general information about BRM Slotcars.

  • Metalchassis Anglewinder
  • 19.000 RpM at 12V
  • Torque 160g/cm
  • no Magnet
  • Width R70/F71mm
  • Front axle with negative wheel camber
  • Wheelbase 101mm
  • Wheight 131.8g/ Body 51.3g 
from
133,95 €
incl. 19% VAT , plus shipping costs
  • Available immediately
    Delivery status: 1-2 days
  • Delivery time: 2 - 3 Workdays  (DE - int. shipments may differ)
Configure
  • Available immediately
    Delivery status: 1-2 days
  • Delivery time: 2 - 3 Workdays  (DE - int. shipments may differ)

Configure

Upgrade Carrera Digital 132

optional
Please read the information regarding customized cars.
We use only the original Carrera chip, so we can guarantee that the car has always the same functions like an original Carrera car. Cars without lights, can be upgraded with Overdrive lights, these have also the same functions then the original Carrara cars.
+44,00 € Quantity: 1
Installation of lights using high quality OVERDRIVE LEDs.
The lights offer the same functions like all original Carrera Digital 132 cars, incl. brakelights.
+18,00 € Quantity: 1
Revoslot and BRM motors can cause problems when using on a Carrera Digital 132 track. We suggest to use optional capacitors.
+4,00 € Quantity: 1

Upgrade lights for analog cars

optional
Please read the information regarding customized cars.
Installation of lights using high quality OVERDRIVE LEDs.
The lights offer the same functions like all original Carrera Digital 132 cars, incl. brakelights.
+32,00 € Quantity: 1

Tuning Options

optional
Here you find detailed information about BRM tuning options.
Unfortunately, BRM's and Revoslot's build quality has declined somewhat, resulting in minor but annoying defects. Sometimes the screws fall out when you open the box, the motor isn't positioned correctly, and the motor pinion doesn't mesh with the axle gear. In some cases, the rims are almost impossible to remove because the hole isn't exactly 3mm. In these cases, the rim must be widened to 3mm with a reamer. During the chassis check, all of these points are checked and corrected.
+7,00 € Quantity: 1
Ortmann tires for the original wheels trued with the RSM tire truer.
This Option is only avaialable in combination with a new configured car !
+13,00 € Quantity: 1
Running in the engine for several hours will increase the performance up to 10%.
+2,00 € Quantity: 1
Motor and gear are running for several hours with a low voltage.
Then all parts will be cleaned and oiled again.

This Option is only avaialable in combination with a new configured car !
+2,00 € Quantity: 1
The screws that fix and position the motor in the motor mount are often difficult to loosen even at the factory. We therefore strongly recommend having these screws replaced immediately. The new screws are of significantly better quality and can be opened with a Torx 6.
+2,00 € Quantity: 1

Your configuration

Pc.

Description

Manufacturer Info:
BRM
BRM di Baratella Enrico & C. SAS
Via Bovazecchino 385
45021 Badia Polesine, Italy
info@brmmodelcars.com

Attention: No toy, not recommended for children under14 years.

Similar items